Dragonfly Exterior Parts

Thanks for visiting our site!
Paintable Manual
Checkout Ebay Auctions For The Cheapest Prices

Here are some more information for Paintable Manual:

During the early part of this decade Toyota was examining its vehicle line up and the decision was made to build a car to entice young people who were looking for something that was small, fun to drive, and affordable. While the Corolla served faithfully in this capacity, Toyota needed something that spoke excitement. The Corolla just wasn't that kind of a car and something radically different was needed. Enter the Matrix. Based on the Corolla platform, the Matrix does what no Corolla can do: turn heads. Let's take a look at this sporty compact and see how the 2006 model stacks up.

In 2003, the Matrix was introduced to the North American market. Built in California as a joint venture with General Motors - the Pontiac Vibe is its twin - the Matrix is aimed toward budget conscious young people who want a car that makes a statement. To save money, the Corolla frame was used, but the Matrix stands some 3 inches taller and is 8 inches shorter than its Toyota sibling. The roof line on the Matrix is completely different too as it slopes from front to back and ends in a wedge, giving the car somewhat of a wagon look to it. This rakish appearance is what gives the Matrix its unique look as well as an extra bit of room for people and their stuff. Indeed, both driver and front passenger sit higher up, much like in a small SUV or as in a car like Chrysler's PT Cruiser. With four doors and a rear lift gate, the Matrix acts more like a wagon, but its sleek exterior easily refutes that fact.

Motorists have a choice between front wheel drive and a four wheel drive versions of the car, something not offered on the Corolla. The standard motor for the Matrix is a 1.8-liter DOHC 16-valve VVT-I 4-cylinder engine. Mated to a five speed manual transmission, the engine turns out a respectable 126hp. For more power, there is also a higher tuned version of the same engine delivering 164hp. It gets paired with a six speed manual transmission. Four wheel drive versions of the Matrix come equipped with a 4-wheel anti-lock brake system [ABS] which is optional on 2WD models.

Gas mileage for the Matrix makes the car a motorist's dream. At 30 mpg city and 36 mpg highway, the front wheel drive version of the car produces some of the best results of any non-hybrid car sold in North America. A 13 gallon fuel tank makes 400 mile trips a possibility on just one tank of gas; this is particularly good for the student who has to drive back and forth between college campus and home.

Unlike many cars of its size, the aftermarket crowd has produced a wide variety of products to help Matrix owners customize their vehicles. Hood protectors, tail light covers, polymer air dams, fog lights, hood scoops and vents, mud flaps, and paintable window covers are some of the Toyota parts and accessories pitched to youth, who are the primary owners of the Matrix.

MSRP starts at US$15,110 [CDN$17,200] with a top of the line Matrix topping out at just under US$20K to about CDN$25K.

For the entire North American market, Toyota sells nearly 100,000 Matrix' per year. Not bad for a car whose origins are fairly simple but whose heart is truly sporty and youth minded.

Copyright 2005 -- Matt Keegan is a contributing writer for Auto Parts Canada, a wholesaler of fine Toyota parts and Toyota accessories for your Toyota truck, van, SUV, or passenger car.

[please Delete] Simple Ways to Mount Flat Panel Tvs

Flat panel televisions are the newest and hottest technology in televisions, and they offer several advantages over standard tube televisions. One of these advantages is the great increase in picture quality, they also offer sleeker, more modern designs that fit well with any decor. Another great benefit is the fact that they are well designed for wall mounting due to their flat design as well as their light weight.

When you begin to consider the possibility of wall mounting one of the first things that you need to know is what is behind the wall that you plan to cut in to, you don't want to drill or cut into anything in the process of mounting.

Once you've determined that you are safe to mount in your chosen location it is time to look at equipment needs for this job. Most of the flat panels that you can purchase do not come with the mounting hardware necessary for wall mounting, so you will need to purchase it separate from the television. First of all you must find and purchase an appropriate wall-mounting bracket, you should be able to check your owner's manual to determine a suitable bracket for your television. The majority of flat panel TV models are compatible with several brackets that follow the standards set by VESA. The models will have the word VESA, which will then be followed by a number that indicates a millimeter distance between mounting holes on the brackets or the TV. An example of this would be a VESA 75, which means that the four holes on the bracket are separated by 75 mm, there are also some brackets that are rectangular in shape and will have a VESA number like 100/200, which indicates that on two sides of the rectangle the holes are separated by 100mm and on the other two by 200mm.

Next on the list of importance is to ensure that the bracket you select is compatible with the screen size of your flat panel, as well as to double check that the weight capability can hold the weight of your TV. It is also important to consider what you would like the bracket to do, such as swiveling to avoid glare or for a better view from a different seat in the room. You may need to nudge the television slightly after mounting in order to assure that your view is exactly as you would like.

The ideal mounting is one where the TV screen is at about eye level to seating, you should also be aware of glare from light reflection, which will reduce the quality of your view, so be aware of these things during the mounting process.

Another aspect of the mounting is the placement of power and A/V cabling. There are ways of doing this that are quick, and ways that are more labor intensive. You can run your wires inside of the wall if you would like, but this will be the most labor intensive. Other options for wiring that avoid the in-wall labor include the use of paintable cable raceways that you can attach to the wall, or you could consider running cables underneath baseboard or molding if you have more distance to cover. Any of these options will eliminate the ugliness associated with the tangled mess of cables and cords that are often visible between your television and your entertainment cabinet.

Once you've determined the route and method of cabling you will need to figure how much of the wiring you will need. As in any situation it is better to have too much than too little, following is an example:

Running wire from receiver to wall -3 ft

Running horizontally behind the wall -7 ft

Running vertically to TV inside the wall -5 ft

Wire for wall to TV distance (with slight excess) -2 ft

Total of all measures -18 ft, adding a 15% error factor gives you approximately 21ft necessary to do the job properly.

Once you've reached this point you are basically finished, all you have to do from here is fit the two pieces of the mount, the one on the wall and the one on the back of the TV, together and your flat panel TV is successfully wall-mounted.

About the Author

Johnny Waymire has a great free resource site, http://tv-advisor.com , containing practical and helpful information on how to purchase Flat Panel TVs that fit YOUR needs. Visit to find all the helps, brands and reviews to make your next purchase very informative.

Thanks for visiting!